EXi: CX-3 Tonewheel Organ
196
6–2: EX Percussion
When the Drawbar Mode is set to EX, the Percussion can
use a mix of up to five drawbar pitches, instead of just one.
These include 2-2/3’ or 4’ (depending on the setting of the
Percussion Harmonic parameter), 16’, 5-1/3’, and the pitches
of the first two EX drawbars. You can set the levels for each
of the five drawbars independently.
This section is grayed out when Drawbar Mode is set to
Normal.
6–2a: EX Percussion
Normal Percussion [0…8]
This sets the volume of the 2nd or 3rd harmonic (2-2/3’ or 4’
drawbars), depending on the setting of the Percussion
Harmonic parameter.
16’ [0…8]
This sets the volume of the 16’ drawbar within the
Percussion pulse.
5 1/3’ [0…8]
This sets the volume of the 5-1/3’ drawbar within the
Percussion pulse.
EX Drawbar 1 [0…8]
This sets the volume of EX Drawbar 1 within the Percussion
pulse.
EX Drawbar 2 [0…8]
This sets the volume of EX Drawbar 2 within the Percussion
pulse.
6–2b: Drag Across Drawbars
Drag Across Drawbars [Off, On]
This controls how touch-drag edits the drawbars. For more
information, see “Drag Across Drawbars” on page 192.
v
6–2: Page Menu Commands
• Compare →p.112
• Write Program →p.112
• Exclusive Solo →p.113
• PAGE →p.126
•MODE →p.126