Mono/Mono Parallel 147: P4EQ // Chorus/Flanger
881
147: P4EQ // Chorus/Flanger
This effect connects a four-band EQ and a chorus / flanger in
parallel. The pan and effect balance can be adjusted
independently for each.
For detailed information on the effects parameters, see “4
band EQ” on page 876 and “Chorus/Flanger” on page 878.
148: P4EQ // Phaser
This effect connects a four-band EQ and a phaser in parallel.
The pan and effect balance can be adjusted independently for
each.
For detailed information on the effects parameters, see “4
band EQ” on page 876 and “Phaser” on page 878.
149: P4EQ // Multitap BPM Dly
This effect connects a four-band EQ and a multitap BPM
delay in parallel. The pan and effect balance can be adjusted
independently for each.
For detailed information on the effects parameters, see “4
band EQ” on page 876 and “Multi-tap BPM Delay” on
page 878.
150: Comp // Comp
This effect connects two compressors in parallel. The pan
and effect balance can be adjusted independently for each.
For detailed information on the effects parameters, see
“Compressor” on page 876.
Left
Right
Wet / Dry Pan
Wet / Dry Pan
Stereo In - Stereo Out
Trim
Parametric 4Band EQ
Chorus / Flanger
Parametric 4Band EQ
Chorus/Flanger
Feedback
LFO: Tri / Sine
Trim LEQ HEQ
Left
Right
Wet / Dry Pan
Wet / Dry Pan
Stereo In - Stereo Out
Trim
Parametric 4Band EQ
Phaser
Parametric 4Band EQ
Phaser
Resonance
LFO: Tri / Sine
Left
Right
Wet / Dry Pan
Wet / Dry Pan
Stereo In - Stereo Out
Trim
Parametric 4Band EQ
Multitap BPM Delay
Parametric 4Band EQ
Feedback
High Damp
Delay
(2)
(1)
Tempo
BPM
Base Note x Times
Base Note x Times
Left
Right
Wet / Dry Pan
Wet / Dry Pan
Stereo In - Stereo Out
Trim LEQ HEQ
Trim LEQ HEQ
Output Level
Output Level
Compressor
Envelope - Control
Envelope - Control
Compressor
Compressor
Compressor
To Next Page
Loading...
Need help?
General
