Korg NAUTILUS Series

EXi: SGX-2 Premium Piano
350
EXi PROGRAM > SGX-2: Home
0–1: Overview
This is the main page of PROGRAM mode. For a full
description of this page and all of its functions, please see
“EXi PROGRAM > Home” on page 127. This section
describes only the overview display, which differs for each
individual EXi.
0–1b: Overview and Page Jump
This PROGRAM > Home page shows an overview of the
most important settings for the Program’s two EXi
instruments. The specific parameters will vary, depending on
which EXi are being used. The parameters for the SGX-2 are
described below.
The graphics give you a quick way to check all of these
settings at a glance. They also let you jump instantly to any
of the displayed parameters. Just touch one of the graphics,
and you’ll jump to the page containing its parameters.
Tip: Pressing EXIT several times will always bring you back
to this page.
Piano Type
This shows the selected Piano Type, which controls the basic
sound of the SGX-2. Touch this area to jump to the
PROGRAM > SGX-2: Main page. For more information,
see “PROGRAM > SGX-2: Main” on page 352.
Components and levels
This section shows the status and volume levels of the
Damper Resonance, Damper Noise, Mechanical Noise, and
Note Release components. If a component is turned off, it’s
shown in gray. Touch this area to jump to the SGX-2’s Main
page.
Piano graphic
This shows the lid position setting. Touch the graphic to
jump to the SGX-2’s Main page.
String Resonance and Una Corda graphics
This shows the status of the String Resonance and Una
Corda features. When the graphics are shown in color, they
are enabled; when they are grayed out, they are disabled.
Touch the graphic to jump to the String Resonance/Una
Corda page.
Common Key Zone
This shows the key zones for EXi1 and EXi2, as set on the
Common section’s Program Basic page, in relation to the
entire MIDI note range. The range of the 61-, 73-, or 88-note
keyboard is also shown, as appropriate.
Press this area to jump to the PROGRAM > Basic/X-
Y/Controllers– Program Basic page.
0–1d: Common
3Band EQ Graphic
Mute (1) [On, Off]
Mute (2) [On, Off]
Mute (DrumT) [On, Off]
EXi1 Instrument Volume [000…127]
EXi2 Instrument Volume [000…127]
Drum Track Volume [000…127]
This is the same as with HD-1 programs. For more
information, please see “0–1d: Common” on page 4.
0–1b
Piano Type
Components
and Levels
Common
Key Zone
Piano graphic
0–1d
0–1PMC