Korg NAUTILUS Series

SEQUENCER > Pattern/RPPR 5–1: Pattern Edit
501
SEQUENCER > Pattern/RPPR
On the NAUTILUS you can use preset patterns, and user
patterns.
Preset patterns provide patterns that are suitable for drum
tracks, and can be selected from any song.
One hundred (U00–99) user patterns are provided for each
song; you can create and store your own patterns in these.
Normally, you will create a track of performance data by
using the “Put To MIDI Track” or “Copy To MIDI Track”
page menu commands to place patterns consisting of several
measures into a track. You can also use the RPPR function,
which lets you trigger patterns assigned to each key simply
by pressing the desired key, and realtime-record the patterns
that play back. (See the RPPR Setup page.)
The user patterns that you make can be converted into user
drum track patterns. This can be used by the drum track
function in PROGRAM, COMBINATION and
SEQUENCER mode.
For more information, see “Convert to Drum Track Pattern”
on page 553.
5–1: Pattern Edit
Here you can record and edit patterns, and assign them to
tracks of a song. The following types of pattern operations
are available.
User patterns can be recorded in real-time, step-recorded, or
created using the Get From MIDI Track command or Copy
Pattern command. You can also copy a preset pattern to a
user pattern and edit it. (You can’t directly edit a preset
pattern.)
Preset patterns and user patterns can be placed in or copied
into a track.
User patterns can also be converted into Drum Track
Patterns, which can then be used in the Drum Track in
Programs and Combinations, as well as Songs. For more
information, see “Convert to Drum Track Pattern” on
page 553.
5–1a: Location, Song/Track Select,
Metronome, Resolution, Tempo
Location [01…99]
Displays the current measure location of the selected pattern.
Length/Meter
Displays the pattern length and meter. When “User Pattern”
is selected, the User Pattern settings can be changed (→PMC
> Pattern Parameter).
Song Name [000…199: name]
Selects a song.
The user pattern will be created in the song you select.
Track Select [MIDI Track01…MIDI Track16,
Master Track, Audio Track01…Audio Track16]
Selects the track that will be used to record/play the pattern
data. The pattern data will be recorded/played using the
settings of the track you select. The area at the right displays
the program bank, number, and name for the selected track.
Settings of Master Track, Audio Track 01–16 will be
ignored. The most recently selected MIDI Track 01–16
will be used.
Metronome [Only REC, REC & Play, Off]
Specifies whether the metronome will sound during
recording or playback. For details, see “0–6d: Metronome
Setup” on page 459.
5–1PMC
5–1a
5–1b
5–1c