Korg NAUTILUS Series Parameter Guide

Effect Guide
756
Mixer
Master Volume
This sets the level of the final output after passing through
the total effects.
Using MIDI to control the Total Effects
In the same way as for Insert and Master Effects, the Total
Effects can be controlled in realtime via Dynamic
Modulation (Dmod). You can use either the built-in
NAUTILUS’s controllers or an external MIDI device, during
live performance or from a sequencer.
PROGRAM and SAMPLING modes
Effect parameters are controlled on the global MIDI
channel.
COMBINATION and SEQUENCER modes
In COMBINATION and SEQUENCER modes, the control
channel for TFX1 and TFX2 are specified by the Ch
(Control Channel) setting in the TFX1 and 2 pages. You can
choose Ch01–16 or Gch.
Ch01–16: Choose from these settings if you want to control
each total effect on a separate channel.
Gch: Choose this setting if you want to control the total
effects on the global MIDI channel.
Note: In SEQUENCER mode, you can record and play back
exclusive messages, and edit tracks that include System
Exclusive events. This lets you switch effects or vary the
value of effect parameters while a song plays.

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)