Raymarine LIGHTHOUSE 4 - Selecting a Sonar Channel; Placing a Waypoint (Sonar, Downvision and Sidevision)

SelectingaSonarchannel
ThefirsttimeyouopenanewFishfinderapppageyouwillberequested
toselectachannel,subsequentlyyoucanchangethesonarchannelby
selectingachanneliconfromtheFishfinderappmenu.
FromtheFishfinderappmenu:
1.Select[Channel:]
2.Selecttheniconforthesonarchannelyouwanttodisplay
.
3.Selectthetransduceryouwanttousefortheselectedsonarchannel.
Onlyapplicableifyouhavemorethanonetransducercapableof
producingtheselectedsonarchannel.
4.Alternatively,select[Allchannels]fromtheChannelpop-overoptionsand
thenchooseyourdesiredsonarmoduleandchannel.
Thechannelandtransducerinuseisidentifiedinthebottomleftcornerof
thescreen.
19.7PlacingaWaypoint(Sonar,DownVision
andSideVision)
WhenyouobservesomethingofinterestintheFishfinderappyoucanplace
awaypointatitslocationsothatyoucanfindtheareaagain.
1.Selectandholdonthepointofinterestonscreen.
TheContextmenuisdisplayedandscrollingispaused,temporarily.
2.Select[AddWaypoint]fromthecontextmenu.
TheSonarimagewillremainpausedforapproximately10secondsafter
theWaypointhasbeenplaced.
264