Raymarine LIGHTHOUSE 4 - Assigning a Function to the User Configurable Key; Performing a Settings Reset; Performing a Factory Reset; Importing User Data

AssigningafunctiontotheUserConfigurablek
ey
Y oucanassignafunctiontotheUserConfigurablekeysonAxiom®Pro
andAxiom®2Prodisplays.
•Axiom®ProdisplayshaveoneUserConfigurablekey.
•Axiom®2ProdisplaysconfiguredusingthePilotVersionlowerkeypad
alsohaveoneUserConfigurablekey.
•Axiom®2Prodisplaysconfiguredusingthe3UserKeyslowerkeypad
have3UserConfigurablekeys.
1.Pressandholdthephysical[UserConfigurablekey].
Y oucanchooseoneofthefollowingoptionsforeachkey:
•Show/hideSidebar
•Start/stoptrack
•RestartXTE
•TouchlockOn/Off
•Takescreenshot
•Show/hideAISvectors
•Switchactivepane
2.Selecttherequiredfunctionfromthelist.
Y oucanalsoassignafunctiontothe[Userconfigurablekey]fromtheSettings
menu:[Homescreen>Settings>ThisDisplay>Userconfigurablekey].
OnAxiom®2Prodisplayswiththe3UserKeyslowerkeypadfitted,youmust
select[3userkeys]insteadof[Pilotversion]asthe[Keypadtype].
Performingasettingsreset
Performingasettingsresetwillresetyourdisplay’ssettingstotheiroriginal
configurationnodata(e.g.:waypoint,routesetc.)willbelostwhen
performingasettingsreset.
FromtheHomescreen:
1.Select[Settings].
2.Select[Thisdisplay].
3.Scrolltothebottomofthe[Thisdisplay]menu.
4.Select[Settingsreset].
5.Select[Y es].
Thedisplaywillrebootandanysettingsthathavebeenchangedwillbe
resettotheiroriginaldefaultvalues.
Performingafactoryreset
Performingafactoryresetwillresetyourdisplaytoitsoriginalfactory
condition.
Important:
P
erformingafactoryresetwillerasealluserdata(i.e.:waypoint,route
andtracks)andresetanychangestothedisplay’ssettings.Ifyouwantto
backupyouruserdataandsettingsreferto:p.91—Import/export
FromtheHomescreen:
1.Select[Settings].
2.Select[Thisdisplay].
3.Scrolltothebottomofthe[Thisdisplay]menu.
4.Select[Factoryreset].
5.Select[Y
es].
Thedisplaywillrebootandthestartupwizardwillbedisplayed.
Importinguserdata
Y oucanimportuserdata(i.e.:Waypoints,RoutesandTracks)toyourMFD.
1.InserttheMicroSDcardthatcontainsyouruserdatafilesintoacard
readerslotonyourMFDorconnectedcardreader.
2.Select[Importfromcard]fromtheImport/exportpage:([Homescreen>
Mydata>Import/export>Importfromcard]).
3.SelecttherelevantSDcardslotfromthefilebrowserandthennavigateto
yourUserdatafile(.gpx).
4.SelecttherelevantGPXfile.
Y ouruserdatahasnowbeenimported.
5.Select[OK].
Gettingstarted
67