Raymarine LIGHTHOUSE 4 - Performing a Power on Reset on an Axiom Pro Display; Performing a Power on Reset on an Axiom 2 Pro Display; Radar Troubleshooting

5.S
wipeyourfingerfromrighttoleftoncetohighlight[Y es].
6.Swipeyourfingerfromlefttorightoncetorestoreyourdisplaytofactory
defaultsettings.
7.When[Datawipecomplete]isdisplayed,swipeyourfingerfromleftto
righttorestartyourdisplay.
PerformingapoweronresetonanAxiom®Prodisplay
Important:
Beforeperformingapoweronresetensureyouhaveback
edupyour
settingsanduserdatatoamemorycard.
1.S witchoffpoweratthebreakertoensurethatthedisplayiscompletely
poweredoff,andnotinStandbymode.Alternatively,removethepower
cablefromthedisplay.
2.Withinapproximately10secondsofpoweringonyourdisplay,pressand
holdthe[Back]and[Switchactive]buttonsuntilthescreengoesblack
andtheRaymarinelogoappears.
ThedisplaywillbootintoRecoverymode.
3.Usethedirectionalcontrolstohighlight[Wipedata/factoryreset].
4.Press[Ok].
5.Select[Y es]torestoreyourdisplaytofactorydefaultsettings.
6.When‘Datawipecomplete’isdisplayed,select[Rebootsystem]now.
PerformingapoweronresetonanAxiom®2Prodisplay
Important:
Beforeperformingapoweronresetensureyouhaveback edupyour
settingsanduserdatatoamemorycard.
1.S witchoffpoweratthebreakertoensurethatthedisplayiscompletely
poweredoff,andnotinStandbymode.Alternatively,removethepower
cablefromthedisplay.
2.Withinapproximately10secondsofpoweringonyourdisplay,pressand
holdthe[Back]and[Menu]buttonsuntilthescreengoesblackandthe
Raymarinelogoappears.
ThedisplaywillbootintoRecoverymode.
3.Usethedirectionalcontrolstohighlight[Wipedata/factoryreset].
4.Press[Ok].
5.Select[Y es]torestoreyourdisplaytofactorydefaultsettings.
6.When‘Datawipecomplete’isdisplayed,select[Rebootsystem]now.
33.4Radartroubleshooting
Noconnectioncanbemadetothescanner
PossibleCausesPossibleSolution
Radarpowereddown
•Ifthescannerproducthasshutdown,powerit
upbyopeningtheRadarappandselectingthe
[Power]icon.
•AQuantumRadarwillshutdownafter30
minutesifneitherawired(RayNet),nora
wireless(Wi-Fi)connectioncanbemadetoa
MFD.
Radarnottransmitting
•Select[Transmit]fortherelevantRadarscanner
fromtheRadarapp.
Missingorincorrect
Wi-Ficredentials
•Ifusingawireless(Wi-Fi)connection,check
thatyouhaveenteredthecorrectSSIDand
passcodeforyourRadar.BoththeSSIDand
passcodeareprovidedontheRadarscanner’s
packaging,andarealsoshownontheserial
numberlabelontheundersideoftheproduct.
458