Raymarine LIGHTHOUSE 4 - Putting the Radar into Standby; Powering down Your Radar Scanner; Set up and Configuration; Selecting a Radar Scanner

S
tandby(Nottransmitting)
Ifthe‘S tandby’messageisdisplayedthenselect[Transmit]tobegin
transmitting.
Transmitting
IfyourR adarscannerisconnected,poweredupandtransmittingthenthe
Radarimageisdisplayedandechoes/targetsaredisplayedonscreen.
Puttingtheradarintostandby
Withyourselectedradardisplayedonscreen:
1.Select[Transmit]fromthemainmenu.
Theradarscannerwillstoptransmittingandisputintostandbymode.
Poweringdownyourradarscanner
Withyourradarscannerinstandbymode:
1.Selectthe[Off]icon.
2.Select[Yes]toconfirmpowerdown.
Theradarscannerwillstillconsumeasmallamountofpowerwhilstitis
poweredoff,thisistoensuretheradarcanbepoweredbackupquickly.
20.5Setupandconfiguration
SelectingaRadarscanner
Onsystemswith2Radarscanners,youcanselectwhichRadarscanneris
usedineachinstanceoftheRadarapp.
1.Selectthe[Settings](“cogs”)iconfromtheRadarappmenu.
2.Selectthe[Scanner:]boxonthe[Transmission]tab.
AlistofavailableRadarscannersisdisplayed.
3.SelecttheRadarscannerthatyouwanttoassociatewiththecurrent
instanceoftheRadarapp.
R adarapp
283