Raymarine LIGHTHOUSE 4 - Waypoint at Range and Bearing from Location; Intel Targets; Creating an Intel Target

21.6W
aypointatRangeandBearingfrom
location
Ifanintelligencereportisreceivedthatprovidesatarget’srangeandbearing
fromthereporter’slocationawaypointcanbecreatedusingthereported
details.
ThewaypointcanbeplacedintheChartappbyopeningtheChartcontext
menuatthelocationgivenandselecting[moreoptions]andthen[PlaceWpt
atRng/Brg]toopentheWaypointdialog.
Screenshotofchartcontextmenuandnewwaypointdialog
Asaminimumthefollowingfieldsarerequiredtocreatethewaypoint:
•[Cursorposition]—Enterthereporter’ scoordinates
•[Bearingfromcursorposition]—Enterthereportedtarget’sBearing
•[Rangefromcursorposition]—Enterthereportedtarget’sRange
Thefollowingadditionalfieldscanbecompleted,ifrequired:
•[Name]—GivetheWaypointaname
•[Symbol]—ChangethedefaultWaypointsymbol.
•[Group]—AssigntheWaypointtoaWaypointgroup.
•[Comments]—Addanyadditionaldetails.
Tofinalizethewaypointcreationselect[Back]or[Close]thedialogue.
FromtheWaypointfromrangeandbearingdialogueyoucanalso[Delete]
theWaypointifyoudonotwanttokeepit,orinitiatea[Goto].
21.7Inteltargets
Inteltargetsaretargetscreatedmanuallybasedonvisualorreported
informationofavessel’spositionandifavailable,courseandspeed.
InteltargetsarelistedintheInteltargetslistandaniconisusedintheChart
apptorepresentthetarget.
WhenanInteltargetiscreateda
purpleInteltargeticonisplaced
onscreenatthespecifiedposition.
IfHeadingandSpeedhavebeen
specifiedthetargeticonwillmove
appropriatelyanddisplayacourse
vector
,otherwisetheiconwill
remainstatic.
Inteltargetswillremainonthesystemuntilcancelled.
CreatinganInteltarget
Targetscanbecreatingusingreportedorsightedinformationaboutatargets
location,HeadingandSpeed.
310