Raymarine LIGHTHOUSE 4 - Homescreen Settings Menus

6.
11Homescreensettingsmenus
Thedisplay’ssettingsareaccessedbyselectingthe[Settings]iconlocated
atthebottomoftheHomescreen.
The[Settings]aredividedintodifferentmenuswhichcanbeaccessedby
selectingthetabsatthetopofthescreen.Thefollowingmenusareavailable:
MenuSettings
[Getting
started]
•Viewhardwareandsoftwareinformationaboutyour
MFD
.
•Viewcartographydetailsforinsertedchartcards.
•UpdateMFDsoftware
•ViewtheLoUdisclaimer([Gettingstarted]tab).
•ViewtheRegulatoryapprovals.
•Changetheuserinterfacelanguage.
•SelectHomescreenicontypes.
[Boatdetails]•Setboaticonandname .
•ConfigureSailing(Sailingvesselsonly).
•ConfigureMinimumsafedepth,heightandwidth.
•Adddistancesforanchoringmode.
•Configureengines.
•Configurebatteries.
•Configuregenerators.
•Configurefueltanks.
•Configureenvironmentsensors.
[Units]•Configurepreferredunitsofmeasurement.
•ConfigureBearingmode .
•Configurevariation.
•ConfigureGNSS(GPS)systemdatum.
•SettimedifferentialsforLoran-C.
MenuSettings
[Thisdisplay]
•Colortheme(daymode).
•AssignaHomescreenpageorapptostartonpowerup
.
•Selectsavelocationforscreenshots.
•UserConfigurablekey(s)(Axiom®ProandAxiom®2Pro
displaysonly).
•Keypadtypeselection(Axiom®2Prodisplaysonly).
•ConfigureSharedBrightness.
•ConfigurehelmgroupingforMercury®VesselView
integration.
•Changeorresetsplashscreengraphic.
•Changeorresethomescreenbackgroundimage.
•Pair/unpairconnectedRMKexternalkeypads.
•Enable/disableexternalalarmoutput.(Axiom®XLand
Axiom®2XLdisplaysonly).
•Connecttoawirelessdisplay.
•ConfigureWi-FiSharing,pairwithawirelessQuantum
Radarscanner,configureWi-Fisettingsandsetup
mobileappaccess.
•ConnecttoaBluetoothdevice.
•PerformaSettingsorFactoryreset.
[Autopilot]
•Enable/DisableAutopilotcontrol.
•Setautopilotresponse.
•Accessadvancedautopilotsettings.
•Configurerouteautomaticturn.
Homescreen95