Raymarine LIGHTHOUSE 4 User Manual

5.
1Switchon/off
Axiom®andAxiom®2displayswithapowerswipe
Switchingonthedisplay
Whenthedisplayispoweredbutinstandbythepowerswipeareawillbe
illuminated.
Toswitchonthedisplay:
1.S wipeyourfingerfromlefttorightacrossthepowerswipearea.
Thedisplaywillbootup.
Switchingthedisplaytostandby
Whenthedisplayisswitchedonfollowthestepsbelowtoputthedisplay
intostandby(switchoff).
Displaystandby
1.Swipeyourfingerfromlefttorightacrossthepowerswipetouchcontrol
TheShortcutsmenuisdisplayed.
2.Pressandholdthe[Powersymbol]untilthescreenswitchesoff.
Note:
Wheninstandby,thedisplaymaystilldrawasmallamountofpowerfrom
thebattery.Ifthisisaconcern,unplugthepowersupplyorswitchoffat
thebreaker.
Removingpower
Ifyouwishtoensurethatthedisplayisnotconsuminganypowerthenitmust
beswitchedoffatthebreakerorhavethepowercableunplugged.
Whenthebreakerisswitchedbackon,orthecableisreconnected,the
displaywillresumeinthesamepowerstatethatitwasinwhenitwas
switchedoff.
Axiom®andAxiom®2displayswithapowerbutton
Switchingonthedisplay
1.Pressthepowerbuttontoswitchonthedisplay.
Thedisplaywillbootup.
Gettingstarted
51

Raymarine LIGHTHOUSE 4 Specifications

General

Operating System	LightHouse 4
Touchscreen	Yes
Connectivity	NMEA2000, Ethernet, Wi-Fi
Chart Compatibility	Navionics, C-MAP
Display Size	Varies by model (e.g., 7", 9", 12", 16")
Display Resolution	Varies by model
Networking	Ethernet, Wi-Fi
GPS	Built-in
Radar Support	Yes, compatible with Raymarine radars
Sonar Support	Yes
Autopilot Integration	Yes, compatible with Raymarine autopilot systems
Weather Data	Yes, via internet
Software Updates	Via Wi-Fi