3.Select[Calibrate]fromthepop-overmenu..
4.Selectthetransducertype(either[Depth],[Wind]or[Speed]).
Instrumentdepthcalibration
Calibrateyourinstrumentdepthtransducerasfollows.
Selecteither:
•[Belowkeel]—Thedepthreadingwillbedecreasedfromthetransducer’s
defaultreadingbytheoffsetvalueyouspecify.Theoffsetshouldbethe
distancebetweenthetransducerandthebottomofthekeel.
•[Belowwaterline]—Thedepthreadingwillbeincreasedfromthe
transducer’sdefaultreadingbytheoffsetvalueyouspecify.Theoffset
shouldbethedistancebetweenthewaterlineandthetransducer.
•[Belowtransducer]—Thisisthetransducer’sdefaultreadingnooffset
isrequired.
64
To Next Page
Loading...
