Dell Force10 MXL Blade - Page 191

Dynamic Host Configuration Protocol (DHCP) | 191
lease
Specify a lease time for the addresses in a pool.
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
Command Mode
DHCP <POOL>
Default
24 hours
Command
History
netbios-name-server
Specify the NetBIOS windows internet naming service (WINS) name servers, in order of preference,
that are available to Microsoft dynamic host configuration protocol (DHCP) clients.
Syntax
netbios-name-server address [address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
none
Command
History
netbios-node-type
Specify the NetBIOS node type for a Microsoft DHCP client. Dell Force10 recommends specifying
clients as hybrid.
Syntax
netbios-node-type type
days
Enter the number of days of the lease.
Range: 0-31
hours
Enter the number of hours of the lease.
Range: 0-23
minutes
Enter the number of minutes of the lease.
Range: 0-59
infinite
Specify that the lease never expires.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
address
Enter the address of the NETBIOS name server. You may enter up to 8, in order of
preference.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module