Dell Force10 MXL Blade - Page 374

374 | Multiple Spanning Tree Protocol (MSTP)
www.dell.com | support.dell.com
Parameters
Defaults
15 seconds
Command Modes
MULTIPLE SPANNING TREE
Command
History
Related
Commands
hello-time
Set the time interval between generation of Multiple Spanning Tree Bridge Protocol Data Units
(BPDUs).
Syntax
hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
Defaults
2 seconds
Command Modes
MULTIPLE SPANNING TREE
Command
History
Related
Commands
max-age
Set the time interval for the MSTP bridge to maintain configuration information before refreshing that
information.
Syntax
max-age seconds
To return to the default values, use the no max-age command.
seconds
Enter the number of seconds the interface waits in the Blocking State and the Learning
State before transiting to the Forwarding State.
Range: 4 to 30
Default: 15 seconds.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
max-age Changes the wait time before MSTP refreshes protocol configuration information.
hello-time Changes the time interval between BPDUs.
seconds
Enter a number as the time interval between transmission of BPDUs.
Range: 1 to 10.
Default: 2 seconds.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
edge-port
bpdufilter default
The amount of time the interface waits in the Blocking State and the Learning State
before transitioning to the Forwarding State.
max-age Changes the wait time before MSTP refreshes protocol configuration information.