Dell Force10 MXL Blade - Page 678

678 | Debugging and Diagnostics
www.dell.com | support.dell.com
Defaults
none
Command Mode
BUFFER PROFILE
Command
History
H
Related
Commands
buffer (Configuration)
Apply a buffer profile to all Field or Switch Fabric processors in a port-pipe.
buffer [csf | fp-uplink] port-set port-pipe buffer-policy buffer-profile
Parameters
queue0 number
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 0.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
queue1 number
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 1.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
queue2 number
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 2.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
queue3 number
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 3.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
buffer-profile (Configuration) Creates a buffer profile that can be applied to an interface.
csf
Enter this keyword to apply a buffer profile to all Switch Fabric processors
in a port-pipe.
fp-uplink
Enter this keyword to apply a buffer profile to all Field Processors in a a
port-pipe.