Dell Force10 MXL Blade - Page 681

Debugging and Diagnostics | 681
Example
Figure 39-1. show buffer-profile Command Example
Related
Commands
show buffer-profile interface
Display the buffer profile that is applied to an interface.
Syntax
show buffer-profile {detail | summary} interface interface slot/port
Parameters
Defaults
none
Command Mode
INTERFACE
Command
History
H
Example
Figure 39-2. show buffer-profile interface Command Example
Related
Commands
FTOS#show buffer-profile summary fp-uplink
Stack Unit Port-set Buffer-profile
0 0 test1
4 0 test2
FTOS#
buffer-profile (Configuration) Creates a buffer profile that can be applied to an interface.
detail
Display the buffer allocations of a buffer profile.
summary
Display the Field Processors and Switch Fabric Processors that are applied
in the system.
interface interface
Enter the keyword interface followed by the interface type, either
tengigabitethernet or fortygigabitethernet.
slot/port
Enter the slot and port number of the interface.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show buffer-profile detail csf linecard 4 port-set 0
Linecard 4 Port-set 0
Buffer-profile test
Queue# Dedicated Buffer Buffer Packets
(Bytes)
0 36960 718
1 18560 358
2 18560 358
3 18560 358
4 9600 64
5 9600 64
6 9600 64
7 9600 63
FTOS#
buffer-profile (Configuration) Creates a buffer profile that can be applied to an interface.