EasyManua.ls Logo

Dell Force10 MXL Blade - Page 74

Dell Force10 MXL Blade
732 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74 | Control and Monitoring
www.dell.com | support.dell.com
Figure 4-31. show tech-support Command Example (Partial)
Usage
Information
Without the page or stack-unit option, the command output is continuous, use Ctrl-z to interrupt the
command output.
The save option works with other filtering commands. This allows you to save specific information of
a show command. The save entry must always be the last option.
For example: FTOS#show tech-support |grep regular-expression |except regular-expression | find
regular-expression | save flash://result
FTOS#show tech-support stack-unit 0
Required Type : -
-- Unit 5 --
Unit Type : Member Unit
Status : not present
Required Type : -
----------------------------------- show environment -------------------
-- Unit Environment Status --
Unit Status Temp Voltage
---------------------------------------------------------------------------
* 1 online 41C ok
* Management Unit
-- Thermal Sensor Readings (deg C) --
Unit Sensor0 Sensor1
---------------------------
1 39 41
----------------------------------- show ip traffic -------------------
IP statistics:
Rcvd: 894390 total, 415557 local destination
0 format errors, 0 checksum errors, 0 bad hop count
0 unknown protocol, 0 not a gateway
15 security failures, 0 bad options
Frags: 0 reassembled, 0 timeouts, 0 too big
0 fragmented, 0 couldn't fragment
Bcast: 402 received, 0 sent; Mcast: 37 received, 0 sent
Sent: 468133 generated, 0 forwarded
42 encapsulation failed, 0 no route
ICMP statistics:
Rcvd: 0 format errors, 0 checksum errors, 0 redirects, 2 unreachable
0 echo, 0 echo reply, 0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 info request, 0 other
Sent: 0 redirects, 0 unreachable, 0 echo, 0 echo reply
0 mask requests, 0 mask replies, 0 quench, 0 timestamp
0 info reply, 0 time exceeded, 0 parameter problem
UDP statistics:
Rcvd: 396516 total, 0 checksum errors, 0 no port
0 short packets, 0 bad length, 28746 no port broadcasts, 0 socket full
Sent: 16460 total, 28746 forwarded broadcasts
TCP statistics:
Rcvd: 4618 total, 0 checksum errors, 0 no port
Sent: 5023 total
ARP statistics:
Rcvd: 43988 requests, 24518 replies, 10 wrong interface
Sent: 42 requests, 6 replies (0 proxy)

Table of Contents

Other manuals for Dell Force10 MXL Blade

Related product manuals