Fujitsu Oracle SPARC M12-2 User Manual

Note -
Remove crossbar cables one by one.
Note -
When you maintain the crossbar box, you may remove the crossbar cables with the
power on.
Note -
The cables at the rear of the crossbar box are bundled together and fastened to the
right-hand cable support with a hook-and-loop fastener. To remove the crossbar cables,
remove the hook-and-loop fastener from the cable support.
The pull-tab differs in shape according to the type of crossbar cable. For details,
see Figure 19-9 and Figure 19-10.
Figure 19-6
Removing the Crossbar Cable (SPARC M12-2S)
Chapter 19 Maintaining the Crossbar Cable 495

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English