Ultima X3® Technology
(X to the Power of 3)
Ultima X3 Technology for Ultima X Series Gas Monitors features:
Multi-sensing
• Up to 31 monitors with up to 3 sensors inputted per monitor
for 93-sensor total
• Combination of electrochemical-, catalytic-, and infrared-type
sensors is available
• Scrolling display – monitor scrolls through type and reading
for all attached sensors
• Operation of monitor as network slave device
Signal boost
• Each sensor is remotely observable up to 3000 ft from
the monitor
• Universal 85-256 VAC or 8-30 VDC power supply available
at remote condulet
ModBus RTU output
• Industry standard format
• RS-485 half-duplex communication interface
• PLC/DCS systems integration
PLC/DCS
[ProSoft-Tested]
Connect X3 unit to PLC/DCS control
systems. X3 Technology is ProSoft-
certied and has been tested and
found to be compatible with Allen-
Bradley PLC/Modbus connectivity
by ProSoft Technology, Inc.
Up to 3000 ft.
To Next Page
Loading...
