1 Creating WindO/I-NV3 Project Data
3-6 SmartAXIS Touch User's Manual
● Saving project data with a different name
You can save the project data being edited with a different name.
1 Click , and then click Save As.
The Save As dialog box is displayed.
2 Enter the project name, and then click Save.
• You cannot use the following characters in the project name.
\ / : , ; * ? “ < > |
• You cannot create project data in read-only folders or in WindO/I-NV3’s working folders (temporary
folders that start with “~”).
To Next Page
Loading...
