3 Goto Screen Button
7-36 SmartAXIS Touch User’s Manual
3.2 Goto Screen Button Configuration Procedure
This section describes the configuration procedure for Goto Screen Buttons.
1 On the Home tab, in the Parts group, click Buttons, and then click Goto Screen Button.
2 Click a point on the edit screen where you want to place the Goto Screen Button.
3 Double-click the dropped Goto Screen Button and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
To switch to Advanced mode, click Advanced.
To Next Page
Loading...
