IDEC SmartAXIS Touch FT1A Series User Manual

2 Creating and Manipulating WindO/I-NV3 Screens
4-8 SmartAXIS Touch User’s Manual
2.5 Duplicating Screens
You can copy a screen that has already been created to create a new screen.
1 Right click a screen folder or screen in the Project window, and then click Duplicate Screens.
The Duplicate Screens dialog box is displayed.
2 Select the screens to copy in Screen List.
3 Specify Screen No. for the new screen and the Number of copies to duplicate, and then click OK.
■ Screen Type
Select the type of screen to duplicate from the following items. The selected screen type is displayed in Screen List.
All, Base Screen, Popup Screen
■ Screen List
This list shows screens that have already been created.
■ Screen No.
Specify the screen number (Base Screen: 1 to 3000, Popup Screen: 1 to 3015) for the new screen.
■ Number of copies
Specify the number of screens to copy (Base Screen: 1 to 2999, Popup Screen: 1 to 3014).
To select multiple screens, press and hold SHIFT or CTRL while you click the specific items.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English