3 Base Screen
4-14 SmartAXIS Touch User’s Manual
The screen that is displayed when the Touch is in Run Mode. This screen places drawing objects and parts on the base
and creates a screen that is displayed on the Touch.
3.1 Base Screen Settings
● General Tab
■ Screen Type
Select Base Screen as the screen type.
You can only select the screen type when creating a new screen.
■ No.
Enter the Base Screen’s screen number (1 to 3000).
■ Title
Enter the Base Screen’s title. The maximum number is 40 characters.
■ Size
Shows the screen size. You cannot change the size of Base Screens.
■ Screen List
This list shows screens that have already been created. It is only displayed when creating a new screen.
3Base Screen
To Next Page
Loading...
