SmartAXIS Touch User's Manual 1-7
4 Flow from Screen and Ladder Program or FBD Program Creation to Run Operation
1
General Information for SmartAXIS
The following flowchart describes the sequence of step from the screen and the ladder program or FBD program
creation for the Touch to the Run operation.
1 Launch WindO/I-NV3
Launch WindO/I-NV3.
2 Creating a Project, Screen and ladder program or FBD program
Create a project and performing various settings.
Create display screens and ladder program or FBD program.
3 Downloading the project
Connect the computer to the Touch using a USB cable or Ethernet cable, and download the created project data to
the internal memory of the Touch.
4 Debug
Using the monitor function, you can correct created project data while confirming actual actions.
5 Troubleshooting
If there is a module or communication-related problem with the Touch, or a problem with the screen settings, the
ladder program or the FBD program, an appropriate message is displayed at the top of the screen.
In addition, error information is saved to a special data register. By referring to this information and repeatedly
correcting the project, downloading, and debugging, the project can be completed.
6 RUN
Starting communication with the external device and execute various functions according to the project settings.
4 Flow from Screen and Ladder Program or FBD Program Creation to Run Operation
1
Launch the WindO/I-NV3
2
Creating a Project, Screen and Ladder Program or FBD Program
Modifying the project
5
Troubleshooting
3
Downloading the project
4
Debug
6
RUN
(F refer to Chapter 2 “2.1 Starting WindO/I-NV3” on page 2-34)
Creating a new project (F refer to Chapter 3 “1.1 Creating New Project Data” on page 3-1)
↓
• Creating new screens (F refer to Chapter 4 “2.1 Creating Screens” on page 4-2)
• Selecting the programming language and creating the program
- Creating new ladder program (F refer to Chapter 12 “Creating Ladder Program” on page 12-5)
- Creating new FBD program (F refer to Chapter 12 “Creating FBD Program” on page 12-33)
(F refer to Chapter 23 “2 Downloading” on page 23-11)
(F refer to Chapter 24 “Monitor Function” on page 24-1)
(F refer to Chapter 30 “Troubleshooting” on page 30-1)
To Next Page
Loading...
