IDEC SmartAXIS Touch FT1A Series User Manual

3 Configuration & Functions
2-38 SmartAXIS Touch User's Manual
3.1 Application Menu Command List
Commands that can be executed from the application button are listed below.
Command Description
New
Interactive Quick Start
Creates project data by configuring settings displayed in dialog boxes step by
step.
From Templates Creates project data using templates provided with WindO/I-NV3.
Open
WindO/I-NV3 Project Opens project data that has already been created.
Other Formats
Opens project data uploaded from a Touch with Downloader and project data
saved in the Downloader format.
Save Saves the project data being edited.
Save As
WindO/I-NV3 Project Saves the project data being edited with a new name.
Other Formats
Converts the project data being edited to data that can be used with
Downloader and saves it.
Print Prints the contents of the project data being edited.
Close Closes the project data being edited.
Recent Projects Shows the list of recently used project data, up to a maximum of ten items.
WindO/I-NV3 Options Customizes WindO/I-NV3 and configures the work environment.
Exit WindO/I-NV3 Exits WindO/I-NV3.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English