SmartAXIS Touch User’s Manual 6-23
2 Picture
6
Drawings
2.1 Picture Configuration Procedure
This section describes the picture configuration procedure.
1 On the Home tab, in the Drawings group, click Picture.
The mouse cursor changes to (picture).
2 Click the location on the edit screen to place the picture.
Picture Manager is displayed.
3 Select a picture, and then click Select.
The selected picture, is placed on the screen.
2Picture
To change the picture that was placed on the screen, perform one of the following operations.
• Double click the picture to open the Properties dialog box, and then click Browse
• Replace the picture in Picture Manager
To Next Page
Loading...
Need help?
General
