SmartAXIS Touch User’s Manual 17-1
17
Preventive Maintenance Function
This chapter describes how to configure the Preventive Maintenance function and its operation on the Touch.
1.1 How the Preventive Maintenance Function is Used
The Preventive Maintenance function monitors the state of devices and counts the time the value of the monitored
devices are 1, as well as the number of times the values of monitored devices change to 1.
The Preventive Maintenance function can perform the following functions.
• Monitor devices that turn on lighting or warning lights and count the operation time
• Report the replacement time for lighting and warning lights by the counted operation time
• Monitor devices connected to buttons and relays and count the operation count
• Report the inspection time for buttons and relays by the counted operation count
Chapter 17
Preventive Maintenance Function
1Overview
Lighting
Warning light
External device
Tou ch
1230 hours
Lighting
360 hours
Warning
light
Lighting
Warning light
Please replace
Lighting
Replace soon
Warning
light
Tou ch
External device
Button
Relay
123 times
Button
1000 times
Relay
Tou ch
External device
Button
Relay
Button
Please inspect
Inspect soon
Relay
Tou ch
External device
To Next Page
Loading...
Need help?
General
