IDEC SmartAXIS Touch FT1A Series User Manual

9 Calendar
9-130 SmartAXIS Touch User’s Manual
9.2 Calendar Configuration Procedure
This section describes the configuration procedure for Calendars.
1 On the Home tab, in the Parts group, click Data Displays, and then click Calendar.
2 Click a point on the edit screen where you want to place the Calendar.
3 Double-click the dropped Calendar and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
To switch to Advanced mode, click Advanced.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English