SmartAXIS Touch User’s Manual 20-53
6 Important Notes
20
Script
3 Select the Use Device Cache check box.
4 Click OK.
6.4 About the Priority of the Operator
As a basic rule, operators are calculated in order from left of the line, but when multiple calculations are combined,
they are calculated in following priority.
This setting will be applied not only to the script, but to the whole project.
Priority Operator
High
()
! ~ -(Negative number)
* / %
+ -(Subtraction)
<< >>
&
^
|
< <= > >=
== !=
&&
||
Low
=
To Next Page
Loading...
