3 Global Script
20-12 SmartAXIS Touch User’s Manual
A Global Script is a script that operates throughout the entire project, regardless of which screen is currently being
displayed. Only one Global Script can be set for a project. This script is executed at the end of scan process of Touch
in accordance with the trigger condition.
3.1 Setting procedures for Global Script
Global Script is setup using the following procedures.
1 On the Configuration tab, in the System Setup group, click Global Script.
The Global Script dialog box is displayed.
2 Click General tab and Trigger Condition tab.
Set or confirm the items displayed in each of the tabs.
●
General Tab
■ Use Global Script
To use the Global Script, select the Use Global Script check box.
■ Script ID
Specify the script ID (1 to 32,000) of the script to operate.
Script Manager is displayed when is clicked. The script can be selected from the script list of Script Manager. For
details, refer to “2.2 Script Manager” on page 20-7.
■ Script Name
Displays the name of the script specified by the script ID.
■ Script
Displays the contents of the script specified by the script ID.
3Global Script
With Global Script, you cannot do indirect read and indirect write of the external device addresses.
(It can be setup in WindO/I-NV3, but it will not operate on the Touch.)
To Next Page
Loading...
