IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 11-11
2 Word Write Command
11
Commands
2.2 Word Write Command Configuration Procedure
This section describes the configuration procedure for the Word Write Command.
1 On the Home tab, in the Parts group, click Commands, and then click Word Write Command.
2 Click a point on the edit screen where you want to place the Word Write Command.
3 Double-click the dropped Word Write Command and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English