SmartAXIS Touch User's Manual 26-15
1 USB Flash Drives
26
External Memory Devices
1.8 USB Popup Screen Function
The USB Popup Screen function displays a specific screen by simply inserting a USB flash drive in the Touch.
This provides an easy way to display a message when the operator inserts a USB flash drive.
●
When a USB flash drive is inserted a popup window is automatically displayed.
Configuration Procedure
1 Create the popup window to be displayed when USB flash drive 1 is inserted.
On the Home tab, in the Screens group, click the arrow under New and then click Popup Screen.
The Screen Properties dialog box is displayed.
2 Change the settings on each tab as necessary, and then click OK.
3 Arrange the object on the editing screen as required.
4 On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box appears.
5 On the Autorun tab, select the Open Popup Screen when USB Flash Drive is inserted check box.
6 Specify the Screen No. of the Popup Screen to display, and the Coordinates, then click OK.
For details, refer to Chapter 3 “3.9 Autorun Tab” on page 3-41.
To Next Page
Loading...
