IDEC SmartAXIS Touch FT1A Series User Manual

2 Creating and Manipulating WindO/I-NV3 Screens
4-12 SmartAXIS Touch User’s Manual
2.7 Reusing Screens
You can copy screens from other project data.
1 On the Home tab, in the Screens group, click Reuse.
2 Select project data that includes the screens to copy, and then click OK.
The Open Screens dialog box is displayed.
3 Click the screens to copy in Screen List, and then click OK.
■ Screen Type
Select the type of screen to copy from the following items. The selected screen type is displayed in Screen List.
All, Base Screen, Popup Screen
■ Screen List
This list shows screens included in the source project data.
If you right click a screen folder or screen in the Project window and then click Reuse Screens, the Open
dialog box is displayed.
If a password has been configured for the project data, the Password Screen will be displayed. Select user
name and enter password.
For details, refer to Chapter 21 “User Accounts and the Security Function” on page 21-1.
To select multiple screens, press and hold SHIFT or CTRL while you click the specific items.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English