IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 14-1
14
Data Log Function
This chapter describes how to configure the Data Log function and its operation on the Touch.
1.1 How the Data Log Function is Used
The Data Log function samples values of devices with the Touch using the configured sampling condition. The
sampled values of devices are saved in internal memory along with the sampling time.
The Data Log function can perform the following functions.
• Sample values of devices at a fixed time interval
• Sample values of devices when a value of device changes
• Output Data Log data to the external memory
Chapter 14 Data Log Function
1Overview
Tou ch
External device
D100 : 123
D100 : 55
12 : 00
12 : 05
12 : 10
D100 : 0
Tou ch
External device
D100 : 123
0
1
USB flash drive
Output to USB flash drive
Data Log data (CSV)
Tou ch

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English