SmartAXIS Touch User’s Manual 20-5
2 Editing and Management of the Script
20
Script
2.1 Script Registration Procedure
This section describes the procedure to create a script and register it in the project.
The registered script can be used in a Multi-Button, Script Command, Multi-Command and Global Script.
1 On the View tab, in the Workspace group, click (Script Manager).
Script Manager opens.
2 Click Add.
Script Editor opens.
3 Specify Script ID.
When creating a new script, enter the script ID (1 to 32000).
2 Editing and Management of the Script
To Next Page
Loading...
