IDEC SmartAXIS Touch FT1A Series

SmartAXIS Touch User's Manual 3-27
3 Project Settings Dialog Box
3
Project
3.2 Communication Interface Tab
The Communication Interface tab is used to configure the functions used by the Touch communication interfaces.
■ Interface Configuration
It displays the communication interfaces and Protocols to use. The settings in the Interface Settings changes
according to the selected item from this list. The supported Protocols for each communication interface are as follows.
Item Communication Interface
Protocol
External Device
Communication
O/I Link
Master
O/I Link
Slave
User
Communication
1 to 3
Maintenance
Communication
Port Serial Interface
RS232C YES NO NO YES NO
RS422/485 YES YES YES YES NO
Ethernet Ethernet Interface YES NO NO YES YES
USB2 USB Interface TypeA NO NO NO YES NO
USB1 USB Interface Mini-B NO NO NO NO YES