IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 14-7
1 Overview
14
Data Log Function
1.5 Using the Data
The saved data can be used in the following ways.
• Display the data in the Line Chart
Configure the data channel numbers and data
numbers and display the data in the Line Chart.
For details, refer to “4.1 Display the Data in the Line
Chart” on page 14-25.
• Save to and read from an external memory
Data Log data is saved in a CSV file format into the
external memory which it can be read on your
computer.
For details, refer to “4.3 Saving Data as a CSV File”
on page 14-37.
• Display the data with the Numerical Input or the
Numerical Display
Copy the data to an internal device and display it with
the Numerical Input or the Numerical Display.
For details, refer to “4.2 Displaying Data as Numerical
Values” on page 14-27.
Sampling Time Data001 Data002 Data003
01/01/2011 12:00:00 20 120 201
01/01/2011 12:10:00 21 121 204
01/01/2011 12:20:00 22 122 206
01/01/2011 12:30:00 23 123 206
01/01/2011 12:40:00 24 124 210
Data Log data
To use with the Touch To use with devices other than the Touch
Book1
Data Log data
(CSV)
Sampling Time Data001 Data002 Data003 Data004
24
124
210
Data001
Data002
Data003

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English