IDEC SmartAXIS Touch FT1A Series

2 Creating and Manipulating WindO/I-NV3 Screens
4-2 SmartAXIS Touch User’s Manual
2.1 Creating Screens
This section describes how to create Base Screens and Popup Screens.
●
Creating a screen
1
On the Home tab, in the Screens group, click the arrow under New.
2 Click Base Screen or Popup Screen.
The Screen Properties dialog box is displayed.
3 Change the settings on each tab as necessary, and then click OK.
2.2 Opening Screens
● Opening a screen
You can open a single screen that has already been created.
Double click the screen to open in the Project window.
2 Creating and Manipulating WindO/I-NV3 Screens
To edit the properties for a Base Screen or Popup Screen that has already been created, double click an area
in the editing window with no objects.
If you right click a screen in the Project window and then click Open Screens, the Open Screens dialog box
is displayed.