SmartAXIS Touch User’s Manual 4-3
2 Creating and Manipulating WindO/I-NV3 Screens
4
Screen
● Opening specific screens
You can open multiple screens as a group.
1 On the Home tab, in the Screens group, click the arrow to the right of Open.
2 Click the Base Screen or the Popup Screen.
The Open Screens dialog box is displayed.
3 Click the screens to open in Screen List, and then click OK.
■ Screen Type
Select the type of screen to open from the following items. The selected screen type is displayed in Screen List.
All, Base Screen, Popup Screen
■ Screen List
This list shows screens that have already been created.
●
Opening the previous or next screen
You can open the screen with the previous screen number or the next screen number of the screen displayed in the
active editing window.
To open the screen with the previous screen number, click (Open Previous Screen) in the Screens group on the
Home tab. To open the screen with the next screen number, click (Open Next Screen).
If you right click a screen folder in the Project window and then click Open Screens, the Open Screens
dialog box is displayed.
To select multiple screens, press and hold SHIFT or CTRL while you click the specific items.
To Next Page
Loading...
