SmartAXIS Touch User’s Manual 20-13
3 Global Script
20
Script
● Trigger Condition Tab
■ Trigger Type
Specify the condition to execute the script.
■ Device
Specify the bit device or bit of the word device.
This is enabled only when Rising-edge or Falling-edge is selected in Trigger Type.
■ Period (sec)
Specify the scan frequency in seconds (1 to 3,600).
This is enabled only when Fixed Period is selected in Trigger Type.
Rising-edge: Script is executed when trigger device changes from 0 to 1.
Falling-edge: Script is executed when trigger device changes from 1 to 0.
Always ON: Script is executed constantly.
Fixed Period: Script is executed at set intervals.
To Next Page
Loading...
