IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 4-9
2 Creating and Manipulating WindO/I-NV3 Screens
4
Screen
• If multiple screens are selected in Screen List or if the Number of copies is 2 or more, consecutive
screen numbers are added to the screens starting with the number specified in Screen No..
Example: When a screen with screen number of 1 is selected in Screen List, the Number of copies is
3, and Screen No. is 100 is selected, then the screen numbers after duplication are “100”,
“101”, “102”.
Example: When screens with screen numbers 3 and 5 are selected in Screen List, the Number of
copies is 2, and Screen No. is 100 is selected, then the screen numbers after duplication are
“100” and “102” for the screens duplicated from screen number 3 and “101” and “103” for the
screens duplicated from screen number 5.
• If a screen number already exists after copying and you click OK on the Duplicate Screens dialog box, an
overwrite confirmation message is displayed.
-Click Yes to overwrite the screen with the number displayed in the confirmation message.
-Click Yes To All to overwrite all the screens.
-Click No to display the next confirmation message without copying the screen with the number
displayed in the confirmation message.
-Click Cancel to stop copying screens.
Screen List’s numbers: 1
Screen No.: 100
Number of copies: 3
Screen No.: 1 Screen No.: 100
Screen No.: 101
Screen No.: 102
Copy
99 99
99
99
Screen List’s numbers: 3, 5
Screen No.: 100
Number of copies: 2
Screen No.: 3
Screen No.: 5
Screen No.: 100
Screen No.: 101
Screen No.: 102
Copy
Screen No.: 103
Copy
99
99
99
Full Full
Full

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English