IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 23-19
3 Uploading
23
Online Function
3 Check the project data details, and then click Upload.
If there is a project file with the same file name in the upload folder, an overwrite confirmation message is displayed.
•Click Yes to start uploading the project data.
•Click Cancel to stop uploading the project data.
When finished uploading, a completion message is displayed.
■ Project Name
The project file is saved with the currently displayed name. To change the project name, enter a new name for the
file. The maximum number is 50 characters.
■ Location
The uploaded project file is saved to the currently displayed location. To change the location of the saved file,
click . The Save Project After Uploading dialog box is displayed. Select a location, and then click Save.
4 Click OK.
5 Click Close on the Upload dialog box.
A confirmation message to open the project is displayed.
You cannot use the following characters in the project name.
\ / : * ? " < > |

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English