IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 26-23
2 USB Autorun Function
26
External Memory Devices
[AUTORUN] section
■ item (required)
Specify the number of commands used from 1 to 5. The USB Autorun function will fail to execute if a value other than
1 to 5 is specified.
■ button_command
■ button_runall
■ language
[COMMAND] section
■ command (required)
command = PRO_DOWNLOAD
■ src_path (required)
Specify the path (250 or less characters) where the project file is to be downloaded.
Use “B:\” for a USB flash drive.
■ reset_keep_device
Specify whether to initialize the keep devices or not when the project file is downloaded. However, when project data
that changes the settings of the data storage area is downloaded, the keep devices are always initialized.
Specify whether to enable or disable the execution buttons for [COMMAND_1] to [COMMAND_5].
Enable: Enables the button.
Disable: Disables the button.
If this item is left blank or contains an illegal value, the Touch assumes “Enable”.
Specify whether to enable or disable the execution buttons for Run All.
Enable: Enables the button.
Disable: Disables the button.
If this item is left blank or contains an illegal value, the Touch assumes “Enable”.
Specify the language to use for the button labels and messages.
Japanese: Shift-JIS
European: English
Chinese: GB2312
Taiwanese: BIG5
Korean
Central European
Baltic
Cyrillic
If this item is left blank or contains an illegal value, the Touch assumes “Japanese”.
Specify the command to execute.
PRO_DOWNLOAD: Download a project file.
PRO_UPLOAD: Upload a project file.
The items required differ for each command except for the “title” item.
Enable: Initializes the keep device.
Disable: Does not initialize the keep devices.
If this item is left blank or contains an illegal value, the MICRO/I assumes "Enable".

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English