SmartAXIS Touch User's Manual 26-25
2 USB Autorun Function
26
External Memory Devices
Explanation
(1)This definition file displays two command execution buttons on the menu screen displayed by the USB Autorun
function. It also enables the Run All button. All button labels and messages are displayed in English.
(2)Downloading a project file from a USB flash drive to the Touch.
(3)Uploading a project to a USB flash drive.
(4)Displays messages below the menu screen for the USB Autorun function.
[AUTORUN]
Defines the number of commands to use and details about the menu
screen.
item = 2 Specifies that two commands will be used.
button_command = Enable
Enables execution buttons for each command from [COMMAND_1]
to [COMMAND_2].
button_runall = Enable Enables the Run All button.
language = English Displays all button labels and messages in English.
[COMMAND_1]
Defines the command assigned to execution button [COMMAND_1].
This is the first command that executes when Run All is touched.
command = PRO_DOWNLOAD Executes "Download a project file".
src_path = "B:\FT_DEMO_1.ZNV"
Downloads the project file “FT_DEMO_1.ZNV” saved on the USB
flash drive (B:) to the Touch.
title = "Change Program" Displays the text “Change Program” as the button label.
[COMMAND_2]
Defines the command assigned to execution button [COMMAND_2].
This is the fourth command that executes when Run All is touched.
command = PRO_UPLOAD Executes "Upload a project file".
dst_path = "B:\Uploaded_Project"
Uploads the project file used to operate the Touch and saves it to
the Uploaded_Project folder on the USB flash drive (B:).
title = "Copy Program" Displays the text “Copy Program” as the button label.
[COMMENT]
Defines the number of commands to use and details about the
menu screen.
comment = "Press the button." Displays the text “Press the button.” below the menu screen.
To Next Page
Loading...
Need help?
General
