SmartAXIS Touch User's Manual 3-107
4 Special Functions
3
Project
4 Enter the items on the Remote Host dialog.
The Remote Host dialog box is displayed.
The remote host is composed of two elements, IP Address and Port.
5 Click Add.
The remote host is registered and reflected in the remote host list.
To register another remote host, repeat the procedure in steps
4 and 5.
6 When you have finished registering all of the remote hosts, click Close.
7 Click (Close).
The Remote Host List dialog box closes.
This concludes configuring the settings.
IP Address: Specify the remote host with an IP address. The Touch performs communication by establishing a
connection to the specified IP address and port number.
Port: Specify the port number used in TCP/IP communication.
Comment: The comment for the remote host can be assigned. The contents or the length of the comment has
no effect on communication.
To delete a registered remote host, select the remote host to delete in the Remote Host List dialog box,
and click Delete.
Once a remote host is deleted, the remote host numbers of the following remote hosts are changed.
This will affect the operation of remote I/O masters that refer to these remote host numbers.
To Next Page
Loading...
