SmartAXIS Touch User’s Manual 4-5
2 Creating and Manipulating WindO/I-NV3 Screens
4
Screen
■ Screen List
This list shows the screens being edited.
■ Select All
Selects all the screens displayed in Screen List.
● Saving a screen with a different screen number
You can save the screen being edited with a different screen number.
1 Right click a screen in the Project window, and then click Save Screen As.
The Save Screen As dialog box is displayed.
2 Specify the screen number after saving, and then click OK.
■ New No.
Specify the screen number (Base Screen: 1 to 3000, Popup Screen: 1 to 3015) after saving.
■ Screen Title
Enter or change the screen title. The maximum number is 40 characters.
■ Screen List
This list shows screens that have already been created.
If you specify an existing screen number and then click
OK
, an overwrite confirmation message is displayed.
•Click Yes to overwrite the screen.
•Click No to stop saving the screen.
To Next Page
Loading...
