4 Key Button
7-60 SmartAXIS Touch User’s Manual
● Options Tab
The Options tab is displayed in Advanced mode.
■ ON delay
Select this check box to use the ON delay function.
■ Security Group
Security groups are a security function for restricting the display and operation of parts.
Time (x100 msec): Specify the length of time that the button must be held down before activation by selecting a
value from 0 to 600 (units of 10 milliseconds).
The button activates after it is held down for a specified period of time.
Hold down for three seconds
Touch Touch
Button
Does not
operate
Button
Operates
This feature protects against mistaken operation by ensuring that the button will not be activated if touched
accidentally.
Display: Selects the security group for which display of parts is restricted. (Default: None)
None: No security function is used.
Administrator, Operator, Reader: Three security groups are set up by default.
Click to display the Security Group Settings dialog box. If you create a security group on the Security
Group Settings dialog box, you can select that created group. For details, refer to Chapter 21 “2.2 Adding
and Editing Security Groups” on page 21-15.
Input: Selects the security group for which operation of parts is restricted. (Default: None)
None: No security function is used.
Administrator, Operator, Reader: Three security groups are set up by default.
Click to display the Security Group Settings dialog box. If you create a security group on the Security
Group Settings dialog box, you can select that created group. For details, refer to Chapter 21 “2.2 Adding
and Editing Security Groups” on page 21-15.
For details about security functions, refer to Chapter 21 “User Accounts and the Security Function” on page
21-1.
To Next Page
Loading...
Need help?
General
