IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 2-7
1 WindO/I-NV3 Specifications
2
WindO/I-NV3 Basic Operations
Installed Fonts in the Touch
Font Name Code System Language
Standard
Fonts
Japanese
JIS 8-bit code
JIS level-1 and
level-2 kanji sets
Japanese
English ISO 8859-1 (Latin1)
Icelandic, Irish, Italian, English, Dutch, Swedish, Spanish, Danish,
German, Norwegian, Portuguese, Finnish, Faeroese, French
Optional
Fonts
Japanese large
font
(first standard)
JIS level-1 kanji set
* Install this font to achieve a sharper display of enlarged JIS
level-1 kanji set.
Refer to “High-quality Fonts” on page 2-10.
Japanese large
font
(second
standard)
JIS level-2 kanji set
* Install this font to achieve a sharper display of enlarged JIS
level-2 kanji set.
Refer to “High-quality Fonts” on page 2-10.
Chinese GB2312 Chinese
Korean KSC5601 Korean
Taiwanese BIG5 Taiwanese
European large
font
ISO 8859-1 (Latin1)
* Install this font to achieve a sharper display of enlarged
European fonts.
Refer to “High-quality Fonts” on page 2-10.
Central European ANSI1250 Czech, Hungarian, Polish, Slovak, Slovene
Baltic ANSI1257 Estonian, Latvian, Lithuanian, Greenlandic, Lappish
Cyrillic ANSI1251 Bulgarian, Belarusian, Ukrainian, Serbian, Macedonian, Russian
• Japanese, European, and European large font are factory-installed.
The standard fonts cannot be replaced; however, the optional fonts can be downloaded from the
WindO/I-NV3.
• The Touch displays the single-byte parts of Chinese, Taiwanese, and Korean with ISO 8859-1, and
supports Hangul characters only in the double-byte part of Korean.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English