IDEC SmartAXIS Touch FT1A Series

SmartAXIS Touch User’s Manual Preface-4
Preface
Preface
This user’s manual describes entire functions, specifications, installation, and operation basics of the SmartAXIS. Also
included are powerful communications of the SmartAXIS and troubleshooting procedures.
This manual describes SmartAXIS Touch (SmartAXIS FT1A-*12RA-*, FT1A-*14KA-* and FT1A-*14SA-*) and
WindO/I-NV3 software. The information includes drawing tools, setup procedures, and how to configure all Touch
operator interfaces.
This user's manual describes the operation and handling of the SmartAXIS FT1A-*12RA-*, FT1A-*14KA-* and
FT1A-*14SA-*. Please read it carefully and ensure that you fully understand the functions and performance of the
SmartAXIS FT1A-*12RA-*, FT1A-*14KA-* and FT1A-*14SA-* and the WindO/I-NV3 software.
Read the following materials as necessary for your particular application.
This manual describes the FT1A Series SmartAXIS Touch and the WindO/I-NV3 software.
Unless otherwise specified, SmartAXIS refers to the FT1A Series SmartAXIS Touch.
For the FT1A Series SmartAXIS Pro and the FT1A Series SmartAXIS Lite, refer to the “SmartAXIS Pro/Lite User's
Manual”.
Type No. References Content
FT9Y-B1390
SmartAXIS Touch User's
Manual
(This document)
Describes the hardware specifications of the SmartAXIS FT1A-*12RA-*,
FT1A-*14KA-* and FT1A-*14SA-*.
FT9Y-B1382
SmartAXIS Ladder
Programming Manual
Describes basic operations for ladder programming, instructions for
monitoring on the SmartAXIS, available devices and instruction lists, and
details of each instruction.
FT9Y-B1386
SmartAXIS FBD
Programming Manual
Describes basic operations for function block programming, available
devices and function block lists, and details of each function block.
External Device Setup Manual
Describes the connection procedures and available devices for various
communication including the PLC-Link communication, O/I Link
communication,
and DM Link communication.
WindO/I-NV3 Help
Describes programming for the SmartAXIS Touch series, and usage
instructions for the WindO/I-NV3 software.
WindLDR Help
Describes usage instructions for WindLDR, programming software for the
SmartAXIS Pro/Lite series.
Character Table (PDF)
A list of fonts can be used with the SmartAXIS FT1A-*12RA-*,
FT1A-*14KA-* and FT1A-*14SA-* and WindO/I-NV3. For restrictions on
using the SmartAXIS FT1A-*12RA-*, FT1A-*14KA-* and FT1A-*14SA-*,
refer to Chapter 2 “1.3 Available Text” on page 2-6.